The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
RMS Power Output (Watts x Channels) | 75 x 4 |
|
Peak Power Output (Watts x Channels) | N/A | |
Power at 2 Ohms (Watts x Channels) | 150 x 4 | |
Bridged Power (Watts x Channels) | 300 x 2 | |
Minimum Impedance Bridged | 4 | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 20-20k Hz | |
THD at Rated RMS Power | 1% | |
Signal to Noise Ratio | 85 dB | |
Input Voltage | 14.4v | |
Amplifier Class | AB | |
Low-Pass Crossover Frequency | 50-250 Hz | |
Low-Pass Slope (dB/octave) | 12 dB/octave | |
High-Pass Crossover Frequency | 50-250 Hz | |
High-Pass Slope (dB/octave) | 12 dB | |
Bass Boost | 0-18 dB | |
Bass Boost Frequency | 45 Hz | |
Fan Cooled | No | |
Fuse Rating | 100 | |
Speaker Level Inputs | Yes | |
Preamp Outputs | 2 | |
Width (inches) | 13-3/8 | |
Height (inches) | 2-7/16 | |
Depth (inches) | 8-13/16 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |