The Power T600-4 is a 4-channel amplifier capable of producing 150 Watts into each of its four channels at 2-Ohms. The T600-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
RMS Power Output (Watts x Channels) | 100 x 4 |
|
Peak Power Output (Watts x Channels) | N/A | |
Power at 2 Ohms (Watts x Channels) | 150 x 4 | |
Bridged Power (Watts x Channels) | 300 x 2 | |
Minimum Impedance Bridged | 4 | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 20-20k Hz | |
THD at Rated RMS Power | 0.1% | |
Signal to Noise Ratio | 85 dB | |
Input Voltage | 14.4v | |
Amplifier Class | AB | |
Low-Pass Crossover Frequency | 20-500 Hz | |
Low-Pass Slope (dB/octave) | 24 dB/oct | |
High-Pass Crossover Frequency | 20-500 Hz | |
High-Pass Slope (dB/octave) | 24 dB/oct | |
Bass Boost | 0-18 dB | |
Bass Boost Frequency | 45 Hz | |
Fan Cooled | No | |
Fuse Rating | 150 | |
Speaker Level Inputs | No | |
Preamp Outputs | 2 | |
Width (inches) | 14-15/16 | |
Height (inches) | 2-1/4 | |
Depth (inches) | 9-5/8 | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |