The Power T500-1bdCP is a 500 Watt mono amplifier featuring Constant Power delivering up to 25% more power across all impedance loads. The frequency response of the T500-1bdCP is optimized exclusively for use with subwoofers.
The T500-1bdCP is based on the legendary T500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (Watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. With the T500-1bdCP, you can now use an "under-the-seat" dedicated subwoofer amplifier to drive two 4-Ohm DVC subwoofers. This amp will provide enough bass to separate you from those envious car audio geeks.
| RMS Power Output (Watts x Channels) | 300 x 1 |
|
| Peak Power Output (Watts x Channels) | 690 x 1 | |
| Power at 2 Ohms (Watts x Channels) | 500 x 1 | |
| Bridged Power (Watts x Channels) | N/A | |
| Minimum Impedance Bridged | N/A | |
| Minimum Impedance Unbridged | 1 | |
| Minimum Impedance | 1 | |
| Best Frequency Response | 20-250 Hz | |
| THD at Rated RMS Power | 1% | |
| Signal to Noise Ratio | 80 dB | |
| Input Voltage | 14.4v | |
| Amplifier Class | BD | |
| Low-Pass Crossover Frequency | 35-250 Hz | |
| Low-Pass Slope (dB/octave) | 24 dB/oct | |
| High-Pass Crossover Frequency | N/A | |
| High-Pass Slope (dB/octave) | N/A | |
| Bass Boost | 0-18 dB | |
| Bass Boost Frequency | 45 Hz | |
| Fan Cooled | No | |
| Fuse Rating | 100 | |
| Speaker Level Inputs | No | |
| Preamp Outputs | 2 | |
| Width (inches) | 11-7/16 | |
| Height (inches) | 2-1/4 | |
| Depth (inches) | 8-15/16 | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |